🛠️ R4TKN 🔥 Wi-Fi Warfare Toolkit for Flipper Zero + BW16

This firmware turns your Flipper Zero (paired with BW16) into a powerful Wi-Fi testing device.
Includes tools like DEAUTH ALL, Targeted Disruption (Per Station / Client), with upcoming features like Random SSID Spam, Beacon Floods, and Handshake Capture.
Perfect for Wi-Fi experiments, stress testing, and educational network security research.

Check Some Updates ? Join our Telegram

https://t.me/+oQWjdRF1wUQyMjBl

⚠️ Important Note
🔴 It may not function properly on modern 5GHz routers/modems, which are not vulnerable to typical deauth or beacon flood techniques due to band separation and stricter security protocols.

⚠️ License & Disclaimer
This software is provided "as-is" for educational and research use only. The author disclaims all liability for misuse or damage incurred from its use. Always obtain proper authorization before testing any network security tool.

⚠️ Known Issues

❗ Compatibility Notice
"It's not working on the other Flipper Zero BW16 Dev Board from Aliexpress or other store."

Some third-party BW16 dev boards (often sold on AliExpress/other marketplaces) may use different pin mappings, bootloaders, or power/level shifting that breaks flashing or runtime behavior with this firmware.

Acknowledgements

• cypher-5G-deauther - dkyazzentwatwa

• delfyRTL

• flipper-zero-tutorials

• lopaka - sbrin

• ambd_sdk Image Tool

• readme.so

⚠️ Available Internationally

• This is already have an full working version of this firmware , not this repo
• Buy Here: Elecrow

Features

• ✅ DEAUTH ALL
  Disconnect all nearby Wi-Fi devices from their networks.

• ✨ TARGETED – PER STATION and PER CLIENT
  Choose a specific Access Point (Station) or a connected device (Client) to target.
  → Other devices will NOT be affected.

---

🛠️ Upcoming / TODO Features

• 🚧 RANDOM SSID (In Progress)
  Will flood the air with randomly generated fake Wi-Fi names (SSIDs) to confuse nearby scanners.

• 🚧 BEACON + DEAUTH (In Progress)
  Will send fake beacon frames with deauth packets to simulate chaotic Wi-Fi environments.

• 🚧 NRF24 + 2.4GHZ (NO EXTRA ESP32) (In Progress)
  🔥 BLE JM + WIFI JAM for 2.4 + 5GHZ DEAUTH 🔥

• 🚧 CAPTURE HANDSHAKE (Planned)
  Will enable WPA/WPA2 handshake capturing for research and testing.

• 🔧 MORE SOON
  Additional tools and experimental features coming soon!

🔌 Pin Mapping: RTL8720DN BW16 ↔ Flipper Zero

RTL8720DN BW16	Flipper Zero
5V	(1) 5V
GND	(8) GND
RX1	(13) TX
TX1	(14) RX

📎 Pinout reference credits: gorebrau/delfyRTL

How to Upload Firmware

📥 Flashing Instructions (BW16)

⚠️ Important Note

For those who already have an existing firmware installed on their BW16, it is recommended to erase the existing firmware first before flashing a new one. This helps avoid conflicts and ensures a clean installation.

1. Run as Administrator

   • Right-click the R4TKN FLASHER and select Run as administrator.

2. Configure Serial Port

   • Go to the COM Port section.
   • Under COM, select the correct port for your connected BW16.
   • Leave the rest of the settings as default.

3. Put BW16 in Flash Mode & Start Flashing

   • If your BW16 is not already in flash mode, do the following:
     • Hold the BOOT button.
     • While holding BOOT, press and release RESET.
     • Release the BOOT button.
     • The BW16 is now in flash mode.
   • Now click the Run Upload button to flash the firmware.

🛠 Step-by-Step Instructions for Flipper Zero

1. Install and Launch qFlipper

   • Visit the official qFlipper page and download the installer for your OS. https://flippeprzero.one/update
   • Install and then open qFlipper.
   • Connect your Flipper Zero via USB-C to your PC.

2. Open the File Manager

   • In qFlipper, click the “File manager” tab to view the contents of your Flipper’s SD card.

3. Locate or Create the apps Folder

   • Navigate to the apps directory on your SD card.
   • If it doesn’t exist, right-click on the SD root and select “New folder”, then name it apps.

4. Copy the .fap File

   • Drag & drop your .fap file directly into the apps folder via qFlipper, or
   • Right-click → Upload to select and add it manually.

5. Verify on the Flipper

   • On your Flipper device, navigate: Applications → FAP Loader.
   • You should now see and be able to launch your newly added app.

📬 Support / Collaboration

Got questions, ideas, or want to collaborate?
Drop an email at [email protected]

Screenshots

PCB

📦 Local Stocks Available! 🇵🇭 Philippines, 🇸🇬 Singapore, 🇲🇾 Malaysia 📦 Stocks Available Internationally via Buy Here: Elecrow