RFC: Add SocketAddr conversion trait to std::io::net and generalize socket constructors

active/0000-socket-addr-conversion-trait.md

@@ -0,0 +1,176 @@
+- Start Date: (2014-07-21)
+- RFC PR #: (leave this empty)
+- Rust Issue #: (leave this empty)
+
+# Summary
+
+Make `std::io::net` socket-wrapping structs (`TcpStream`, `UdpStream` etc.) accept bounded generic
+type for address.
+
+# Motivation
+
+Currently there is an inconsistency in our networking API when an address to connect to/listen
+on should be provided. `TcpStream::connect()` method accepts an `&str` address and `u16` port;
+`TcpStream::connect_timeout()` accepts `SocketAddr`; `TcpListener::bind()` accepts `&str` and `u16`;
+`UdpSocket::bind()` and `UdpSocket::connect()` accept `SocketAddr`.
+
+This inconsistency itself is disturbing; however, there is more than this. Even if we changed
+everything to use `&str/u16` pair or back to `SocketAddr`, there still will be usability problems.
+`SocketAddr` is inconvenient to construct manually; `&str/u16`, on the other hand, requires needless
+conversion from `SocketAddr` and back when `SocketAddr` is *the* original value of the address (for
+example, it can be retrieved from `getifaddrs()` system call).
+
+Ideally, the user should be able to provide anything resembling IP address/port pair, and the
+library should convert it internally to `SocketAddr` to use in low-level socket calls. And Rust
+has all necessary facilities to allow so.
+
+# Detailed design
+
+A new trait is introduced to the standard library:
+
+```rust
+pub trait AsSocketAddr {
+    fn as_socket_addr(&self) -> IoResult<SocketAddr>;
+}
+```
+
+Then all functions/methods which need an address accept a generic parameter bounded by this trait:
+
+```rust
+impl TcpStream {
+    pub fn connect<A: AsSocketAddr>(addr: A) -> IoResult<TcpStream> { ... }
+    pub fn connect_timeout<A: AsSocketAddr>(addr: A, timeout_ms: u64) -> IoResult<TcpStream> { ... }
+}
+
+impl TcpListener {
+    pub fn bind<A: AsSocketAddr>(addr: A) -> IoResult<TcpListener> { ... }
+}
+
+impl UdpSocket {
+    pub fn bind<A: AsSocketAddr>(addr: A) -> IoResult<UdpSocket> { ... }
+    pub fn connect<A: AsSocketAddr>(self, other: A) -> UdpStream { ... }
+}
+```
+
+This trait is implemented for a number of types:
+
+```rust
+impl AsSocketAddr for SocketAddr {
+    #[inline]
+    fn as_socket_addr(&self) -> IoResult<SocketAddr> { Ok(*self) }
+}
+
+impl AsSocketAddr for (IpAddr, u16) {
+    #[inline]
+    fn as_socket_addr(&self) -> IoResult<SocketAddr> {
+        let (ip, port) = *self;
+        Ok(SocketAddr { ip: ip, port: port });
+    }
+}
+
+// Better use `<S: Str>` instead of `&'a str`, but it will conflict with other implementations
+// in the current trait matching system
+
+impl<'a> AsSocketAddr for (&'a str, u16) {
+    fn as_socket_addr(&self) -> IoResult<SocketAddr> {
+        let (host, port) = *self;
+        match get_host_addresses(host).map(|v| v.move_iter().next()) {
+            Ok(Some(addr)) => (addr, port).as_socket_addr(),
+            Ok(None) => { /* whatever error indicating that no addresses are available */ }
+            Err(e) => Err(e)
+        }
+    }
+}
+
+impl<'a> AsSocketAddr for &'a str {
+    // accepts strings like 'localhost:12345'
+    fn as_socket_addr(&self) -> IoResult<SocketAddr> {
+        // split the string by ':' and convert the second part to u16
+    }
+}
+```
+
+This will allow calling aforementioned methods with different types of arguments:
+```rust
+let mut stream = TcpStream::connect("localhost:12345").unwrap();
+// or
+let mut stream = TcpStream::connect(("localhost", 12345)).unwrap();
+// or
+let mut stream = TcpStream::connect((Ipv4Addr(127, 0, 0, 1), 12345)).unwrap();
+// or
+let addr: SocketAddr = first_address_for_interface("eth0").unwrap();
+let mut stream = TcpStream::connect_timeout(addr, 10_000).unwrap();
+```
+
+This provides great flexibility, does not hamper performance at all (due to static dispatch) and
+still gives nice and clean interface.
+
+Note that this pattern is already used in `std`, namely, in `std::path` module. There is a trait,
+[`BytesContainer`](http://doc.rust-lang.org/std/path/trait.BytesContainer.html), which represents
+generic string of bytes, and `Path` constructors accept values of types implementing this trait.
+This allow calling `Path::new()` with string slices, byte vectors or even other paths.
+
+# Drawbacks
+
+Adding such "overloading" trait increases complexity of implementation slightly. It also somewhat increases
+cognitive load on the programmer when he or she reads API documentation because it won't be immediately
+obvious which arguments constructor methods can accept. However, this can be mitigated easily by
+emphasizing polymorphic behavior of such methods in the same documentation. Apparently, there seem
+to be no problems with `Path` API now.
+
+Another drawback is esthetical: currently connecting to an address represented as a `&str/u16` looks
+like this:
+```rust
+let mut stream = TcpStream::connect("localhost", 12345).unwrap();
+```
+Under this proposal it will look like this:
+```rust
+let mut stream = TcpStream::connect(("localhost", 12345)).unwrap();
+```
+Note an additional set of parentheses. This may be somewhat confusing. However, implementing
+`AsSocketAddr` for `&str` greatly reduces this problem: when a fixed address is needed, it can be
+written as a string directly (see example above).
+
+# Alternatives
+
+Leave everything as it is and be stuck with inconsistent and sometimes inconvenient API forever.
+
+One thing that really should be done regardless of whether this proposal is accepted or not is
+that all aforementioned methods have to be unified, for example, they all should accept `&str/u16`
+arguments, without variations. This counts as an alternative.
+
+Another alternative is to provide several methods, for example, one accepting `&str/u16` and another
+`SocketAddr`. However, this will increase amount of available methods, and they will have different
+names as Rust does not have methods overloading, cluttering socket interfaces.
+
+Even another possibility is to introduce new enum for this purpose:
+```rust
+enum SocketAddrWrapper<'a> {
+    SocketAddr(SocketAddr),
+    HostPort(&'a str, u16),
+    Address(&'a str)
+}
+
+impl<'a> SocketAddrWrapper<'a> {
+    pub fn as_socket_addr(&self) -> SocketAddr {
+        match *self {
+            // whatever
+        }
+    }
+}
+```
+This will require calling constructor methods like this:
+```rust
+let mut stream = TcpStream::connect(Address("localhost:12345")).unwrap();
+// or
+let addr: SocketAddr = first_address_for_interface("eth0").unwrap();
+let mut stream = TcpStream::connect(SocketAddr(addr)).unwrap();
+```
+
+However, this alternative is less flexible (since enums are closed) and more syntactically heavy at
+the call site, which is undesirable.
+
+# Unresolved questions
+
+Exact name of the trait and its method is an open question.
+