Issue after flashing freenove ESP32 WROOM

[cldbrr]

Tool

nanoff

Description

I've got issue after flashing freenove device is not visible.

ESP32-S3 WROOM FREENOVE
ESP32-S3 (ESP32-S3 (QFN56) (revision v0.2))
Freenove ESP32-S3 ESP32 S3 Board Lite (16 MB Flash), Dual-core 32-bit 240 MHz Microcontroller
https://store.freenove.com/products/fnk0099?variant=44969478881478

Tested both USB ports. Is this device supported? Which image should I use?

How to reproduce

nanoff --platform esp32 --serialport COM4 --update
nanoff --listdevices

Expected behaviour

Device is flashed and visible after flashing

Screenshots

Aditional context

No response

[coderabbitai]

📝 CodeRabbit Plan Mode

Generate an implementation plan and prompts that you can use with your favorite coding agent.

• Create Plan

Examples

• Example 1
• Example 2

---

🔗 Similar Issues

Possible Duplicates

• ESP32_OLIMEX is not discovered after Flashing the Firmware #1661

Related Issues

• Cannot upload a firmware for ESP32-C3 with a flash memory 16MB #1656
• Command 'nanoFramework: Flash device' resulted in an error #1646

👤 Suggested Assignees

• M4rtinSc
• romankiss
• lehrbua

---

🧪 Issue enrichment is currently in open beta.

You can configure auto-planning by selecting labels in the issue_enrichment configuration.

To disable automatic issue enrichment, add the following to your .coderabbit.yaml:

issue_enrichment:
  auto_enrich:
    enabled: false

💬 Have feedback or questions? Drop into our discord!

[alberk8]

@cldbrr, Plug the USB cable to the USB C port on the left of the board and try again.