support labels field in edit add command

[aibarbetta]

Support labels field in kustomize edit add command to allow adding labels without also automatically injecting corresponding selectors

[k8s-ci-robot]

Thanks for your pull request. Before we can look at your pull request, you'll need to sign a Contributor License Agreement (CLA).

📝 Please follow instructions at https://git.k8s.io/community/CLA.md#the-contributor-license-agreement to sign the CLA.

It may take a couple minutes for the CLA signature to be fully registered; after that, please reply here with a new comment and we'll verify. Thanks.

---

• If you've already signed a CLA, it's possible we don't have your GitHub username or you're using a different email address. Check your existing CLA data and verify that your email is set on your git commits.
• If you signed the CLA as a corporation, please sign in with your organization's credentials at https://identity.linuxfoundation.org/projects/cncf to be authorized.
• If you have done the above and are still having issues with the CLA being reported as unsigned, please log a ticket with the Linux Foundation Helpdesk: https://support.linuxfoundation.org/
• Should you encounter any issues with the Linux Foundation Helpdesk, send a message to the backup e-mail support address at: [email protected]

Details

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository. I understand the commands that are listed here.

[k8s-ci-robot]

Welcome @aibarbetta!

It looks like this is your first PR to kubernetes-sigs/kustomize 🎉. Please refer to our pull request process documentation to help your PR have a smooth ride to approval.

You will be prompted by a bot to use commands during the review process. Do not be afraid to follow the prompts! It is okay to experiment. Here is the bot commands documentation.

You can also check if kubernetes-sigs/kustomize has its own contribution guidelines.

You may want to refer to our testing guide if you run into trouble with your tests not passing.

If you are having difficulty getting your pull request seen, please follow the recommended escalation practices. Also, for tips and tricks in the contribution process you may want to read the Kubernetes contributor cheat sheet. We want to make sure your contribution gets all the attention it needs!

Thank you, and welcome to Kubernetes. 😃

[k8s-ci-robot]

Hi @aibarbetta. Thanks for your PR.

I'm waiting for a kubernetes-sigs member to verify that this patch is reasonable to test. If it is, they should reply with /ok-to-test on its own line. Until that is done, I will not automatically test new commits in this PR, but the usual testing commands by org members will still work. Regular contributors should join the org to skip this step.

Once the patch is verified, the new status will be reflected by the ok-to-test label.

I understand the commands that are listed here.

Details

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[k8s-ci-robot]

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by: aibarbetta
To complete the pull request process, please assign knverey after the PR has been reviewed.
You can assign the PR to them by writing /assign @knverey in a comment when ready.

The full list of commands accepted by this bot can be found here.

Details

Needs approval from an approver in each of these files:

• OWNERS

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

[natasha41575]

This is a backwards-incompatible change that would require a kustomize CLI major version bump that we are not yet ready to release.

An alternative approach that would be backwards compatible would be to add an exclude-selectors option, so that kustomize edit add labels edits commonLabels by default. If you want to keep your PR as it currently is (which is arguably more intuitive behavior than the alternative), I think we should wait to merge this until we are ready to cut kustomize v5.

[aibarbetta]

Hi @natasha41575, thanks for the comment. I'm okay with the exclude-selectors change, I can do that.

But I'm not sure why this is not backwards compatible right now, the include-selectors option I added is true by default, so the command uses commonLabels by default. Is there an issue with having an option that is true by default?

[natasha41575]

the include-selectors option I added is true by default

Oh my bad, I missed that. In that case this is fine. I will take a closer look later this week, thanks!

[natasha41575]

/ok-to-test

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue or PR as fresh with /remove-lifecycle stale
• Mark this issue or PR as rotten with /lifecycle rotten
• Close this issue or PR with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

[aibarbetta]

/remove-lifecycle stale

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue or PR as fresh with /remove-lifecycle stale
• Mark this issue or PR as rotten with /lifecycle rotten
• Close this issue or PR with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

[aibarbetta]

/remove-lifecycle stale

[natasha41575]

This is similar to #4178, and I am leaning toward accepting that one instead.

[aibarbetta]

This is similar to #4178, and I am leaning toward accepting that one instead.

Sorry, which one? This is 4178

[natasha41575]

Ah sorry I meant #4478

[gaeljw]

@aibarbetta Do you mind if I reuse the code you wrote in #4478 then?

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue or PR as fresh with /remove-lifecycle stale
• Mark this issue or PR as rotten with /lifecycle rotten
• Close this issue or PR with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue or PR as fresh with /remove-lifecycle rotten
• Close this issue or PR with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle rotten

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue or PR with /reopen
• Mark this issue or PR as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

[k8s-ci-robot]

@k8s-triage-robot: Closed this PR.

Details

In response to this:

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue or PR with /reopen
• Mark this issue or PR as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.