The keyboard is the exclusive product of Ergomech Store, you can get it here: Sofle Hybrid - Ergomech Store

This repo is the code to help you compile the qmk firmware by yourself The keyboard features several advance options:

• 1 Encoder on the left sides

• 1 5 way switch on the right side

• 2 OLEDs display, one on each sides of the keyboards

The firmware is fully supported by VIAL, this is the firmware folder for compiling the firmware.

How to compile the firmware

• Download this repo and unzip it

• Rename the folder to sofle_ergomech_qmk

• Clone VIAL-QMK repo

• Copy this repo folder to vial-qmk/keyboards

• run make git-submodule

• Compile the firmware: qmk compile -kb sofle_ergomech_qmk -km vial -e CONVERT_TO=promicro_rp2040

How to flash the firmware

• Hold the reset button on the bottom of the pcb

• Plug in the usb cable while holding the reset button

• Release the reset button as soon as the usb cable is plugged

• An USB drive should appears in your PC

• Copy the UF2 firmware file generated by compiling steps

• The Drive will immediately disconnect, this is normal, the firmware is flashed

Default firmware

The keyboard come preflashed with VIAL compatible firmware, and if you don't wish to dwell into the code just yet, it's perfectly fine to use VIAL to config the keyboard.

And here is the default keymap for the keyboards: