A simple Flipper Zero air quality monitoring application. It displays measured PM1.0/PM2.5/PM10 Particulate Matter concentrations and calculated Air Quality Index (AQI).
Connect the Plantower PMS5003/PMS7003/PMS9003 sensor according to the wiring diagram below.
| Flipper Pin | Sensor Pin |
|---|---|
| 1 (5V) | 1 (5V) |
| 11 (GND) | 2 (GND) |
| 13 (TX) | 4 (RX) |
| 14 (RX) | 5 (TX) |
- Clone
airmonrepository usinggit clone https://github.com/3cky/flipperzero-airmoncommand. - Install uFBT Flipper Build Tool.
- Compile application running
ufbtcommand in the cloned directory root. - Install and start
airmonapplication on Flipper attached over USB usingufbt launchcommand.
Use left/right arrows for PM/AQI display mode switching. Flipper LED will blink once every successful sensor reading by color according to the current AQI value.
Airmon is available under the GPL 3 license. See the LICENSE file for more info.