Skip to content
抓取並上傳 RSS

抓取並上傳 RSS #89894

Sign in to view logs

抓取並上傳 RSS

抓取並上傳 RSS #89894

Workflow file for this run

.github/workflows/fetchRss.yml at 9530825
name: 抓取並上傳 RSS
on:
workflow_dispatch:
push:
branches:
- main
paths:
- '.github/workflows/*'
- 'code/*'
- '*'
- '**'
schedule:
- cron: '*/5 * * * *' # 每隔 5 分鐘運行一次
- cron: '0,5,10,15,20,25,30,35,40,45,50,55 * * * *' # 每 5 分鐘
- cron: '*/10 * * * *' # 每隔 10 分鐘運行一次
jobs:
deploy:
timeout-minutes: 5
runs-on: ubuntu-latest
steps:
- name: Step 1 - 檢出代碼
timeout-minutes: 2
uses: actions/checkout@v4
- name: Step 2 - 檢查並取消較新的運行
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
run: |
echo "2.1 - 開始檢查取消動作"
echo "獲取當前運行 ID..."
CURRENT_RUN_ID=${{ github.run_id }}
echo "當前運行 ID: $CURRENT_RUN_ID"
echo "列出同一分支、同一工作流程的所有運行（排除當前自己）..."
gh run list \
--workflow "${{ github.workflow }}" \
--branch "${{ github.ref_name }}" \
--json databaseId,status \
--jq ".[] | select(.status == \"queued\" or .status == \"in_progress\") | select(.databaseId != $CURRENT_RUN_ID)" \
| while read -r run_id; do
echo "2.2 - 取消運行 $run_id..."
gh run cancel $run_id
done
- name: Step 3 - 如果沒有較新的運行則繼續
run: |
echo "3 - 繼續當前運行..."
- name: Step 4 - 檢出代碼 2
timeout-minutes: 2
run: |
echo "4.1 - 開始檢出代碼 2"
counter=0
while true; do
counter=$((counter+1))
echo "4.2 - 嘗試拉取代碼次數: $counter"
if git pull; then
echo "4.3 - 成功拉取代碼！"
break
fi
sleep 1
done
echo "4.4 - 完成檢出代碼 2"
- name: Step 5 - Install and configure Cloudflare WARP
timeout-minutes: 2
run: |
echo "5.1 - 開始 Install and configure Cloudflare WARP"
counter=0
while true; do
counter=$((counter+1))
echo "5.2 - 嘗試 curl trace 次數: $counter"
if curl -v https://1.1.1.1/cdn-cgi/trace; then
break
fi
sleep 1
done
echo "5.3 - 下一步"
counter=0
while true; do
counter=$((counter+1))
echo "5.4 - 嘗試 curl pubkey 次數: $counter"
if curl https://pkg.cloudflareclient.com/pubkey.gpg | sudo gpg --dearmor -o /usr/share/keyrings/cloudflare-warp-archive-keyring.gpg; then
break
fi
sleep 1
done
echo "5.5 - 下一步"
counter=0
while true; do
counter=$((counter+1))
echo "5.6 - 嘗試寫入 apt source 次數: $counter"
if echo "deb [arch=amd64 signed-by=/usr/share/keyrings/cloudflare-warp-archive-keyring.gpg] https://pkg.cloudflareclient.com/ $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/cloudflare-client.list; then
break
fi
sleep 1
done
echo "5.7 - 下一步"
counter=0
while true; do
counter=$((counter+1))
echo "5.8 - 嘗試 apt update 次數: $counter"
if sudo apt update -y; then
break
fi
sleep 1
done
echo "5.9 - 下一步"
counter=0
while true; do
counter=$((counter+1))
echo "5.10 - 嘗試安裝 cloudflare-warp 次數: $counter"
if sudo apt install -y cloudflare-warp; then
break
fi
sleep 1
done
echo "5.11 - 下一步"
counter=0
while true; do
counter=$((counter+1))
echo "5.12 - 嘗試 warp registration 次數: $counter"
if warp-cli --accept-tos registration new; then
break
fi
sleep 1
done
echo "5.13 - 下一步"
counter=0
while true; do
counter=$((counter+1))
echo "5.14 - 嘗試設置 mode 次數: $counter"
if warp-cli --accept-tos mode warp+doh; then
break
fi
sleep 1
done
echo "5.15 - 下一步"
counter=0
while true; do
counter=$((counter+1))
echo "5.16 - 嘗試 tunnel ip add 次數: $counter"
if warp-cli --accept-tos tunnel ip add 127.0.0.1; then
break
fi
sleep 1
done
echo "5.17 - 下一步"
counter=0
while true; do
counter=$((counter+1))
echo "5.18 - 嘗試 tunnel host add 次數: $counter"
if warp-cli --accept-tos tunnel host add localhost; then
break
fi
sleep 1
done
echo "5.19 - 下一步"
counter=0
while true; do
counter=$((counter+1))
echo "5.20 - 嘗試 connect 次數: $counter"
if warp-cli --accept-tos connect; then
break
fi
sleep 1
done
echo "5.21 - 完成 WARP 配置"
- name: Step 6 - Testing WARP
timeout-minutes: 2
run: |
echo "6.1 - 開始 Testing WARP"
warp-cli --accept-tos status
echo "6.2 - 檢查 1.1.1.1 trace"
counter=0
while true; do
counter=$((counter+1))
echo "6.3 - 嘗試檢查 https://1.1.1.1/cdn-cgi/trace 次數: $counter"
if curl -s https://1.1.1.1/cdn-cgi/trace | grep -q "warp=on"; then
echo "6.4 - warp is on"
break
else
echo "6.5 - warp is off, retrying..."
fi
sleep 1
done
echo "6.6 - 檢查 mozilla.cloudflare-dns.com trace"
counter=0
while true; do
counter=$((counter+1))
echo "6.7 - 嘗試檢查 https://mozilla.cloudflare-dns.com/cdn-cgi/trace 次數: $counter"
if curl -s https://mozilla.cloudflare-dns.com/cdn-cgi/trace | grep -q "warp=on"; then
echo "6.8 - warp is on"
break
else
echo "6.9 - warp is off, retrying..."
fi
sleep 1
done
echo "6.10 - 檢查 tunnel stats"
counter=0
while true; do
counter=$((counter+1))
echo "6.11 - 嘗試 tunnel stats 次數: $counter"
if warp-cli --accept-tos tunnel stats; then
break
fi
sleep 1
done
echo "6.12 - 顯示 warp-cli help"
warp-cli --accept-tos --help
echo "6.13 - 檢查 warp-cli settings (protocol)"
warp-cli --accept-tos settings | grep protocol
echo "6.14 - 顯示全部 settings"
warp-cli --accept-tos settings
echo "6.15 - 設定 tunnel protocol 為 MASQUE"
warp-cli --accept-tos tunnel protocol set MASQUE
echo "6.16 - 再次檢查 settings (protocol)"
warp-cli --accept-tos settings | grep protocol
echo "6.17 - 檢查 images.weserv.nl quota"
counter=0
while true; do
counter=$((counter+1))
echo "6.18 - 嘗試 images.weserv.nl quota 次數: $counter"
if curl -s curl -v https://images.weserv.nl/quota; then
break
fi
sleep 1
done
echo "6.19 - 檢查 wsrv.nl quota"
counter=0
while true; do
counter=$((counter+1))
echo "6.20 - 嘗試 wsrv.nl quota 次數: $counter"
if curl -s curl -v https://wsrv.nl/quota; then
break
fi
sleep 1
done
echo "6.21 - 拉取 GitHub XML (方法1)"
counter=0
while true; do
counter=$((counter+1))
echo "6.22 - 嘗試拉取 GitHub XML (方法1) 次數: $counter"
if curl -s https://github.com/raileo98/test2/raw/refs/heads/main/hk_rthk_ch.xml | head -n 10; then
break
fi
sleep 1
done
echo "6.23 - 拉取 GitHub XML (方法2)"
counter=0
while true; do
counter=$((counter+1))
echo "6.24 - 嘗試拉取 GitHub XML (方法2) 次數: $counter"
if curl -s https://raw.githubusercontent.com/raileo98/test2/refs/heads/main/hk_rthk_ch.xml | head -n 10; then
break
fi
sleep 1
done
echo "6.25 - 完成 Testing WARP"
- name: Step 7 - 檢出代碼 3
timeout-minutes: 2
run: |
echo "7.1 - 開始檢出代碼 3"
counter=0
while true; do
counter=$((counter+1))
echo "7.2 - 嘗試拉取代碼 (第三次) 次數: $counter"
if git pull; then
echo "7.3 - 成功拉取代碼！"
break
fi
sleep 1
done
echo "7.4 - 完成檢出代碼 3"
- name: Step 8 - 安裝依賴
timeout-minutes: 2
run: |
echo "8.1 - 開始安裝依賴"
counter=0
while true; do
counter=$((counter+1))
echo "8.2 - 嘗試 apt update 次數: $counter"
if sudo apt update -y; then
break
fi
sleep 1
done
echo ""
counter=0
while true; do
counter=$((counter+1))
echo "8.3 - 嘗試安裝 python3 python3-pip valkey 次數: $counter"
if sudo apt install python3 python3-pip valkey -y; then
break
fi
sleep 1
done
echo ""
counter=0
while true; do
counter=$((counter+1))
echo "8.4 - 嘗試安裝 Python 套件次數: $counter"
if sudo python3 -m pip install --upgrade -r requirements.txt; then
break
fi
sleep 1
done
echo ""
counter=0
while true; do
counter=$((counter+1))
echo "8.5 - 嘗試查詢 valkey 狀態次數: $counter"
if sudo systemctl status valkey; then
break
fi
sleep 1
done
echo ""
#counter=0
#while true; do
#counter=$((counter+1))
#echo "8.6 - 嘗試 enable valkey 次數: $counter"
#if sudo systemctl enable valkey; then
# break
#fi
#sleep 1
#done
echo ""
counter=0
while true; do
counter=$((counter+1))
echo "8.7 - 嘗試 start valkey 次數: $counter"
if sudo systemctl start valkey; then
break
fi
sleep 1
done
echo ""
counter=0
while true; do
counter=$((counter+1))
echo "8.8 - 嘗試再次查詢 valkey 狀態次數: $counter"
if sudo systemctl status valkey; then
break
fi
sleep 1
done
echo "8.9 - 完成安裝依賴"
- name: Step 9 - 執行 Python 腳本
timeout-minutes: 5
run: |
echo "9.1 - 開始執行 Python 腳本"
python3 code/rthk.py
echo "9.2 - 完成執行 Python 腳本"
- name: Step 10 - valkey 狀態
run: |
echo "10.1 - 開始檢查 valkey 狀態"
counter=0
while true; do
counter=$((counter+1))
echo "10.2 - 嘗試檢查 valkey 狀態次數: $counter"
if sudo systemctl status valkey; then
break
fi
sleep 1
done
echo "10.3 - 完成 valkey 狀態檢查"
- name: Step 11 - 上傳 RSS 文件
run: |
echo "11.1 - 開始上傳 RSS 文件"
git config --global user.email "[email protected]"
git config --global user.name "github-actions"
git add *.xml
git add *.md
echo '# git stash'
git commit -m "Upload RSS file"
git push origin main
echo "11.2 - 完成上傳 RSS 文件"