/bin/ssh-keygen conflict with libcrypto ?

[lbdyck]

Using the z/OS ssh-keygen on a system with zopen installed but not the zopen openssh I'm getting this (see below)

/u/lbdyck1/t>dir
total 48
                    drwxr-xr-x   3 LBDYCK1  ZOWEDEV     8192 Jan  3 11:12 .
                    drwxr-xr-x   4 LBDYCK1  ZOWEDEV     8192 Jan  6 10:01 ..
                    drwxr-xr-x   9 LBDYCK1  ZOWEDEV     8192 Jan  3 11:12 zigi
/u/lbdyck1/t>git clone [email protected]:lbdyck/zfstools.git
Cloning into 'zfstools'...
The authenticity of host 'github.com (140.82.112.4)' can't be established.
ED25519 key fingerprint is SHA256:+DiY3wvvV6TuJJhbpZisF/zLDA0zPMSvHdkr4UvCOqU.
This key is not known by any other names.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added 'github.com' (ED25519) to the list of known hosts.
Load key "/u/lbdyck1/.ssh/id_ed25519": error in libcrypto
[email protected]: Permission denied (publickey).
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

The libcrypto is definitely coming from /usr/local/zopen/usr/local/zopen/openssl/... or /usr/local/zopen/local/lib/...

Please advise - I'm guessing the openssl came in with zopen and perhaps with git but openssh is not there.

[IgorTodorovskiIBM]

Can you re-reun with:

GIT_TRACE=1 git clone [email protected]:lbdyck/zfstools.git

You should see something like this:

12:48:47.583549 run-command.c:666       trace: run_command: unset GIT_DIR; GIT_PROTOCOL=version=2 ssh -o SendEnv=GIT_PROTOCOL [email protected] 'git-upload-pack '\''lbdyck/zfstools.git'\'''
12:48:47.583726 run-command.c:758       trace: start_command: /home/itodoro/zopen/usr/local/altbin/ssh -o SendEnv=GIT_PROTOCOL [email protected] 'git-upload-pack '\''lbdyck/zfstools.git'\'''

[lbdyck]

Done:

/u/lbdyck1/t>GIT_TRACE=1 git clone [email protected]:lbdyck/zfstools.git
13:40:12.327327 exec-cmd.c:267          trace: resolved executable dir: /u/lbdyck/zopen/usr/local/zopen/git/git-heads.v2.47.0.20241211_194122.zos/bin
13:40:12.330550 git.c:479               trace: built-in: git clone [email protected]:lbdyck/zfstools.git
Cloning into 'zfstools'...
13:40:12.341747 run-command.c:666       trace: run_command: unset GIT_DIR; GIT_PROTOCOL=version=2 ssh -o SendEnv=GIT_PROTOCOL [email protected] 'git-upload-pack '\''lbdyck/zfstools.git'\'''
13:40:12.342037 run-command.c:758       trace: start_command: /u/lbdyck/zopen/usr/local/altbin/ssh -o SendEnv=GIT_PROTOCOL [email protected] 'git-upload-pack '\''lbdyck/zfstools.git'\'''
Load key "/u/lbdyck1/.ssh/id_ed25519": error in libcrypto
[email protected]: Permission denied (publickey).
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

[lbdyck]

Created a clean environment with only z/OS and the basic zopen for git and everything works fine. The above issues are with a mixed environment that was kludged up it appears.