LED's randomly stopped working

[jingato]

Hey, so my system has been setup and working (mostly) well for a few months now. Yesterday everything just turned off and stopped working at first I couldn't seem to get a signal video capture, so I figured that was the issue because I have been having issues with that and my splitter. However, after messing with that a bit I got the signal and can see it in the preview but I am still not getting anything on my LED's. So I tried playing an effect using the remote control and even that didn't play.

So there is clearly something going wrong, but I don't know if it is a software issue or hardware. Nothing should have changed on either so that is where it is confusing. I was hoping maybe there is something in the logs that may be an indication. I will paste them below? Is there a way to get more info in the logs that could be useful as well?

If there is nothing out of the ordinary, how do you suggest I best debug it to track down the problem? I already checked the basics like loose wires and power and that all seemed fine.

My setup consists of
Raspberry Pi 4 running HyperHDR 21.0
EZCOO HDMI 2.1 Splitter
Elgato HD60X (v2)
pimoroni plasma 2040
SK6812 12v

2025-12-27T01:20:48.194Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video15
2025-12-27T01:20:48.194Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video21
2025-12-27T01:20:48.195Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video14
2025-12-27T01:20:48.195Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video22
2025-12-27T01:20:48.195Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video0
2025-12-27T01:20:48.198Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:232) Searching for Elgato HD60 X: Elgato HD60 X (video0) 0 x 0 @ 0 fps, input: -1 (p010)
2025-12-27T01:20:48.198Z [V4L2:ELGATO HD60 X:] *************************************************************************************************
2025-12-27T01:20:48.198Z [V4L2:ELGATO HD60 X:] Starting V4L2 grabber. Selected: Elgato HD60 X: Elgato HD60 X (video0) [/dev/video0] 1920 x 1080 @ 60 fps p010 input -1
2025-12-27T01:20:48.198Z [V4L2:ELGATO HD60 X:] *************************************************************************************************
2025-12-27T01:20:48.198Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:867) Hardware cropping is not supported: ignoring
2025-12-27T01:20:48.198Z [V4L2:ELGATO HD60 X:] Set device input to: Camera 1
2025-12-27T01:20:48.198Z [FLATBUFSERVER] Tone mapping: 0
2025-12-27T01:20:48.198Z [FLATBUFSERVER] Started on port 19400
2025-12-27T01:20:48.199Z [WEBSERVER] Initialize Webserver
2025-12-27T01:20:48.199Z [FLATBUFSERVER] Started local domain socket server: 'hyperhdr-domain'
2025-12-27T01:20:48.199Z [FLATBUFSERVER] Tone mapping: 0
2025-12-27T01:20:48.199Z [FLATBUFSERVER] NV12 quarter of frame mode: 0
2025-12-27T01:20:48.201Z [NETFORWARDER] Forwarder has changed state to disabled
2025-12-27T01:20:48.202Z [V4L2:ELGATO HD60 X:] Set resolution to: 1920 x 1080
2025-12-27T01:20:48.203Z [V4L2:ELGATO HD60 X:] Set framerate to 60 FPS
2025-12-27T01:20:48.203Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T01:20:48.203Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T01:20:48.203Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:84) Index 1 for HDR YUV
2025-12-27T01:20:48.213Z [WEBSERVER] Apply Webserver settings
2025-12-27T01:20:48.213Z [WEBSERVER] Set document root to: :/www
2025-12-27T01:20:48.214Z [WEBSERVER] Started: 'HyperHDR WebServer (HTTP)' on port: 8090
2025-12-27T01:20:48.214Z [SSDP] (SSDPHandler.cpp:93) The local address is empty
2025-12-27T01:20:48.214Z [WEBSERVER] Initialize Webserver
2025-12-27T01:20:48.214Z [WEBSERVER] Apply Webserver settings
2025-12-27T01:20:48.214Z [WEBSERVER] Set document root to: :/www
2025-12-27T01:20:48.217Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName:          ttyACM0
2025-12-27T01:20:48.217Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation:    /dev/ttyACM0
2025-12-27T01:20:48.217Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description:       Pico
2025-12-27T01:20:48.218Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer:      Raspberry Pi
2025-12-27T01:20:48.218Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0xa
2025-12-27T01:20:48.218Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier:  0x2e8a
2025-12-27T01:20:48.218Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber:      E661410403A17238
2025-12-27T01:20:48.219Z [WEBSERVER] Setup SSL certificate
2025-12-27T01:20:48.219Z [WEBSERVER] Setup private SSL key
2025-12-27T01:20:48.219Z [WEBSERVER] Started: 'HyperHDR WebServer (HTTPS)' on port: 8092
2025-12-27T01:20:48.220Z [SSDP] (SSDPHandler.cpp:42) SSDPHandler is initializing
2025-12-27T01:20:48.220Z [SSDP] (SSDPHandler.cpp:183) The local address is: 192.168.1.160
2025-12-27T01:20:48.220Z [SSDP] (SSDPServer.cpp:94) Initialize the SSDP server
2025-12-27T01:20:48.220Z [SSDP] Starting the SSDP server
2025-12-27T01:20:48.223Z [LEDDEVICE0_ADALIGHT] Detected Rp2040 type board. HyperHDR skips the reset. State: 1, 1
2025-12-27T01:20:48.226Z [LEDDEVICE0_ADALIGHT] DETECTED DEVICE USING HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico FIRMWARE (HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, mem1: 0, mem2: 448, heap: 123232 RGBW => Gain: 255/255, red: 160, green: 160, blue: 160  Welcome! Awa driver 9.) at 1 msec
2025-12-27T01:20:48.226Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on
2025-12-27T01:20:48.226Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On
2025-12-27T01:20:48.226Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 20ms
2025-12-27T01:20:48.226Z [COMPONENTCTRL0] LED device: enabled
2025-12-27T01:20:48.227Z [SMOOTHING0] Using alternative smoothing input (0)
2025-12-27T01:20:48.267Z [SMOOTHING0] Using alternative smoothing procedure (0)
2025-12-27T01:20:48.268Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T01:20:48.268Z [V4L2:ELGATO HD60 X:] Video pixel format is set to: P010
2025-12-27T01:20:48.288Z [V4L2:ELGATO HD60 X:] Started
2025-12-27T01:20:48.290Z [V4L2:ELGATO HD60 X:] Frame too small: 0 != 6220800
2025-12-27T01:20:48.290Z [V4L2:ELGATO HD60 X:] Frame too small: 0 != 6220800
2025-12-27T01:20:48.290Z [V4L2:ELGATO HD60 X:] Frame too small: 0 != 6220800
2025-12-27T01:20:48.290Z [V4L2:ELGATO HD60 X:] Frame too small: 0 != 6220800
2025-12-27T01:20:48.451Z [MUXER0] Set visible priority to 255
2025-12-27T01:20:48.451Z [HYPERHDR0] New priority[255], previous [255]
2025-12-27T01:20:48.451Z [HYPERHDR0] No source left -> switch LED-Device off
2025-12-27T01:20:48.451Z [SMOOTHING0] Clearing queued colors before: disabling
2025-12-27T01:20:48.451Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T01:20:48.451Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
2025-12-27T01:20:48.451Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
2025-12-27T01:20:48.451Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 0
2025-12-27T01:20:48.451Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off
2025-12-27T01:20:48.451Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:543) Set LED strip to black/power off
2025-12-27T01:20:48.457Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
2025-12-27T01:20:48.479Z [LEDDEVICE0_ADALIGHT] Received goodbye: 'HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, mem1: 0, mem2: 450, heap: 123232
' (94)
2025-12-27T01:20:48.486Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyACM0
2025-12-27T01:20:48.486Z [COMPONENTCTRL0] LED device: disabled
2025-12-27T01:20:48.882Z [WEBSERVER] Web server resources initialized: /usr/share/hyperhdr/bin/../lib/web_resources.rcc
2025-12-27T01:20:49.166Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:1231) Worker's thread count  = 3
2025-12-27T01:20:49.173Z [MUXER0] Priority 240 is now active
2025-12-27T01:20:49.173Z [MUXER0] Set visible priority to 240
2025-12-27T01:20:49.173Z [HYPERHDR0] New priority[240], previous [255]
2025-12-27T01:20:49.173Z [HYPERHDR0] New source available -> switch LED-Device on
2025-12-27T01:20:49.173Z [SMOOTHING0] Clearing queued colors before: enabling
2025-12-27T01:20:49.173Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T01:20:49.173Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 1
2025-12-27T01:20:49.173Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:246) Enable the device
2025-12-27T01:20:49.173Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyACM0
2025-12-27T01:20:49.173Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyACM0, Baud rate [2000000]bps
2025-12-27T01:20:49.175Z [IMAGETOLED_MNG0] Total index number is: 124572 (memory: 124572). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T01:20:49.196Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName:          ttyACM0
2025-12-27T01:20:49.196Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation:    /dev/ttyACM0
2025-12-27T01:20:49.196Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description:       Pico
2025-12-27T01:20:49.196Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer:      Raspberry Pi
2025-12-27T01:20:49.196Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0xa
2025-12-27T01:20:49.196Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier:  0x2e8a
2025-12-27T01:20:49.196Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber:      E661410403A17238
2025-12-27T01:20:49.200Z [LEDDEVICE0_ADALIGHT] Detected Rp2040 type board. HyperHDR skips the reset. State: 1, 1
2025-12-27T01:20:49.203Z [LEDDEVICE0_ADALIGHT] ESP sent: 'HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, mem1: 0, mem2: 450, heap: 123232'
2025-12-27T01:20:49.203Z [LEDDEVICE0_ADALIGHT] ESP sent: 'RGBW => Gain: 255/255, red: 160, green: 160, blue: 160'
2025-12-27T01:20:49.203Z [LEDDEVICE0_ADALIGHT] DETECTED DEVICE USING HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico FIRMWARE (Welcome! Awa driver 9.) at 1 msec
2025-12-27T01:20:49.203Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on
2025-12-27T01:20:49.203Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On
2025-12-27T01:20:49.203Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 20ms
2025-12-27T01:20:49.203Z [COMPONENTCTRL0] LED device: enabled
2025-12-27T01:20:49.204Z [SMOOTHING0] Using alternative smoothing input (0)
2025-12-27T01:20:49.244Z [SMOOTHING0] Using alternative smoothing procedure (0)
2025-12-27T01:20:49.346Z [IMAGETOLED_MNG0] Total index number is: 124572 (memory: 124572). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T01:20:49.739Z [NET_DISCOVERY] Found Pico/RP2040 at ttyACM0:-1 (Pico)
2025-12-27T01:20:49.715Z [SERVICE_mDNS] Starting the network discovery thread
2025-12-27T01:20:49.763Z [NET_DISCOVERY] Found Home Assistant at 192.168.1.198:8123 (4bdbf18806b2409ca4d2a701d9a7bdf7.local)
2025-12-27T01:20:49.764Z [AUTOTONEMAPPING] Tone mapping OFF triggered by:  U threshold (180),  after 505 ms
2025-12-27T01:20:49.764Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:143) setHdrToneMappingMode to: Disabled
2025-12-27T01:20:49.764Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:149) setHdrToneMappingMode replacing LUT and restarting
2025-12-27T01:20:49.764Z [FLATBUFSERVER] Tone mapping: 0
2025-12-27T01:20:49.765Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T01:20:49.765Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T01:20:49.765Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:89) Index 2 for YUV
2025-12-27T01:20:49.836Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T01:20:49.836Z [AUTOTONEMAPPING] Tone mapping is currently: disabled
2025-12-27T01:20:49.836Z [COMPONENTCTRL0] HDR (global): disabled
2025-12-27T01:20:50.187Z [WEBSOCKET] (WebSocketClient.cpp:40) New connection from ::ffff:192.168.1.151
2025-12-27T01:20:50.220Z [NET_DISCOVERY] Found Hue bridge at 192.168.1.198:443 (Philips Hue - 4A7566._hue._tcp.local)
2025-12-27T01:20:50.527Z [WEBSOCKET] (HyperAPI.cpp:946) log streaming activated for client ::ffff:192.168.1.151
2025-12-27T01:22:47.914Z [V4L2:ELGATO HD60 X:] Video cache: size: 3, hits: 7013, needed: 1, cleanup: 0, limit: 8
2025-12-27T01:22:47.924Z [PERFORMANCE] [USB: FPS = 59.15, decoding = 5ms, frames = 3549, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.15, processed = 3549], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T01:23:13.797Z [WEBSOCKET] (HyperAPI.cpp:955) log streaming deactivated for client  ::ffff:192.168.1.151
2025-12-27T01:23:34.131Z [EFFECTENGINE0] Run effect "Atomic swirl" on channel 1
2025-12-27T01:23:34.131Z [EFFECTENGINE0] (EffectEngine.cpp:92) Start the effect: name [Atomic swirl]
2025-12-27T01:23:34.131Z [MUXER0] Register new input 'Web Configuration@::ffff:192.168.1.151/EFFECT' with priority 1 as inactive
2025-12-27T01:23:34.132Z [EFFECT0(Atomic...)] Begin playing the effect with priority: 1
2025-12-27T01:23:34.133Z [MUXER0] Priority 1 is now active
2025-12-27T01:23:34.134Z [MUXER0] Set visible priority to 1
2025-12-27T01:23:34.134Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2025-12-27T01:23:34.134Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T01:23:34.134Z [SMOOTHING0] Selecting config (1) => type: Linear, pause: false, settlingTime: 200ms, interval: 40ms (25Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2025-12-27T01:23:34.134Z [SMOOTHING0] Using linear smoothing input (1)
2025-12-27T01:23:34.134Z [HYPERHDR0] New priority[1], previous [240]
2025-12-27T01:23:34.134Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 0
2025-12-27T01:23:34.134Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
2025-12-27T01:23:34.134Z [IMAGETOLED_MNG0] Total index number is: 1328 (memory: 1328). User sparse processing is: disabled, image size: 80 x 45, area number: 332
2025-12-27T01:23:34.134Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 25.00 Hz
2025-12-27T01:23:34.134Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:422) Refresh rate = 25.00 Hz
2025-12-27T01:23:34.134Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 40ms
2025-12-27T01:23:34.134Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:432) Refresh interval updated to 40ms
2025-12-27T01:23:34.134Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:447) LED refresh interval adjustment caused by smoothing configuration change to 40ms (proposed: 40ms)
2025-12-27T01:23:34.215Z [SMOOTHING0] Using linear smoothing procedure (1)
2025-12-27T01:23:37.690Z [MUXER0] Removed source priority 1
2025-12-27T01:23:37.691Z [MUXER0] Set visible priority to 240
2025-12-27T01:23:37.691Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2025-12-27T01:23:37.691Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T01:23:37.691Z [SMOOTHING0] Selecting config (0) => type: Alternative, pause: false, settlingTime: 30ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250
2025-12-27T01:23:37.691Z [SMOOTHING0] Using alternative smoothing input (0)
2025-12-27T01:23:37.691Z [HYPERHDR0] New priority[240], previous [1]
2025-12-27T01:23:37.691Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 1
2025-12-27T01:23:37.691Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
2025-12-27T01:23:37.691Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 50.00 Hz
2025-12-27T01:23:37.691Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:422) Refresh rate = 50.00 Hz
2025-12-27T01:23:37.691Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 20ms
2025-12-27T01:23:37.691Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:432) Refresh interval updated to 20ms
2025-12-27T01:23:37.691Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:447) LED refresh interval adjustment caused by smoothing configuration change to 20ms (proposed: 20ms)
2025-12-27T01:23:37.706Z [IMAGETOLED_MNG0] Total index number is: 124572 (memory: 124572). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T01:23:37.722Z [EFFECT0(Atomic...)] The effect quits with priority: 1
2025-12-27T01:23:37.724Z [EFFECTENGINE0] Effect 'Atomic swirl' has finished.
2025-12-27T01:23:37.724Z [EFFECT0(Atomic...)] Effect named: 'Atomic swirl' is deleted
2025-12-27T01:23:37.731Z [SMOOTHING0] Using alternative smoothing procedure (0)
2025-12-27T01:23:47.914Z [V4L2:ELGATO HD60 X:] Video cache: size: 3, hits: 3550, needed: 0, cleanup: 0, limit: 8
2025-12-27T01:23:47.923Z [PERFORMANCE] [USB: FPS = 59.17, decoding = 5ms, frames = 3550, invalid = 0, mode = direct], [INSTANCE0: FPS = 56.53, processed = 3392], [LED0: FPS = 48.46, send = 2907, processed = 2907, dropped = 91]
2025-12-27T01:24:05.828Z [IMAGETOLED_MNG0] Total index number is: 124572 (memory: 124572). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T01:24:06.927Z [AUTOTONEMAPPING] Tone mapping ON triggered after 5 sec
2025-12-27T01:24:06.927Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:143) setHdrToneMappingMode to: Fullscreen
2025-12-27T01:24:06.927Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:149) setHdrToneMappingMode replacing LUT and restarting
2025-12-27T01:24:06.927Z [FLATBUFSERVER] Tone mapping: 0
2025-12-27T01:24:06.928Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T01:24:06.928Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T01:24:06.928Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:84) Index 1 for HDR YUV
2025-12-27T01:24:06.980Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T01:24:06.980Z [AUTOTONEMAPPING] Tone mapping is currently: enabled
2025-12-27T01:24:06.980Z [COMPONENTCTRL0] HDR (global): enabled
2025-12-27T01:24:09.571Z [AUTOTONEMAPPING] Tone mapping OFF triggered by:  Y threshold (255),  after 505 ms
2025-12-27T01:24:09.571Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:143) setHdrToneMappingMode to: Disabled
2025-12-27T01:24:09.571Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:149) setHdrToneMappingMode replacing LUT and restarting
2025-12-27T01:24:09.571Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T01:24:09.572Z [FLATBUFSERVER] Tone mapping: 0
2025-12-27T01:24:09.572Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T01:24:09.572Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:89) Index 2 for YUV
2025-12-27T01:24:09.627Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T01:24:09.627Z [AUTOTONEMAPPING] Tone mapping is currently: disabled
2025-12-27T01:24:09.627Z [COMPONENTCTRL0] HDR (global): disabled
2025-12-27T01:24:47.914Z [V4L2:ELGATO HD60 X:] Video cache: size: 3, hits: 3427, needed: 1, cleanup: 0, limit: 8
2025-12-27T01:24:47.919Z [PERFORMANCE] [USB: FPS = 57.12, decoding = 4ms, frames = 3427, invalid = 0, mode = direct], [INSTANCE0: FPS = 57.12, processed = 3427], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T01:24:48.634Z [IMAGETOLED_MNG0] Total index number is: 124572 (memory: 124572). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T01:25:37.739Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}]
2025-12-27T01:25:42.694Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":576}]
2025-12-27T01:25:42.719Z [WEBSOCKET] (HyperAPI.cpp:1121) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":"Pico (/dev/ttyACM0)","value":"ttyACM0"}],"ledDeviceType":"adalight"}]
2025-12-27T01:25:47.926Z [PERFORMANCE] [USB: FPS = 58.94, decoding = 5ms, frames = 3537, invalid = 0, mode = direct], [INSTANCE0: FPS = 58.94, processed = 3536], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T01:25:48.228Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}]
2025-12-27T01:26:01.146Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}]
2025-12-27T01:26:20.393Z [AUTOTONEMAPPING] Enabled: no, time to enable: 30s, time to disable: 500ms, thresholds: { 155, 175, 160}
2025-12-27T01:26:26.200Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}]
2025-12-27T01:26:33.866Z [V4L2:ELGATO HD60 X:] Restarting video grabber is now blocked due to reloading of the configuration
2025-12-27T01:26:33.866Z [V4L2:ELGATO HD60 X:] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0 
2025-12-27T01:26:33.866Z [V4L2:Elgato HD60 X:] (GrabberWrapper.cpp:180) CEC keycode. Start: 0, stop: 0
2025-12-27T01:26:33.866Z [V4L2:ELGATO HD60 X:] (Grabber.cpp:390) setBrightnessContrastSaturationHue nothing changed
2025-12-27T01:26:33.866Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:161) setHdrToneMappingMode nothing changed: Disabled
2025-12-27T01:26:33.866Z [AUTOTONEMAPPING] Tone mapping is currently: disabled
2025-12-27T01:26:33.866Z [V4L2:ELGATO HD60 X:] (Grabber.cpp:299) setFpsSoftwareDecimation to: 1
2025-12-27T01:26:33.866Z [SIGNAL_OLD] (DetectionManual.cpp:84) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2025-12-27T01:26:33.867Z [SIGNAL_OLD] (DetectionManual.cpp:74) Signal threshold set to: {0, 0, 0} and frames: 50
2025-12-27T01:26:33.867Z [SIGNAL_AUTO] (DetectionAutomatic.cpp:375) Automatic signal detection -> errorTolerance: 9, modelTolerance: 90, sleepTime: 1000, wakeTime: 0
2025-12-27T01:26:33.867Z [V4L2:ELGATO HD60 X:] (Grabber.cpp:317) Force encoding to: p010 (old: p010)
2025-12-27T01:26:33.867Z [V4L2:ELGATO HD60 X:] setQFrameDecimation is now: enabled
2025-12-27T01:26:39.632Z [V4L2:ELGATO HD60 X:] Restarting video grabber is now blocked due to reloading of the configuration
2025-12-27T01:26:39.632Z [V4L2:ELGATO HD60 X:] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0 
2025-12-27T01:26:39.632Z [V4L2:Elgato HD60 X:] (GrabberWrapper.cpp:180) CEC keycode. Start: 0, stop: 0
2025-12-27T01:26:39.632Z [V4L2:ELGATO HD60 X:] (Grabber.cpp:390) setBrightnessContrastSaturationHue nothing changed
2025-12-27T01:26:39.632Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:143) setHdrToneMappingMode to: Fullscreen
2025-12-27T01:26:39.632Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:149) setHdrToneMappingMode replacing LUT and restarting
2025-12-27T01:26:39.632Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T01:26:39.632Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T01:26:39.632Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:84) Index 1 for HDR YUV
2025-12-27T01:26:39.684Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T01:26:39.685Z [AUTOTONEMAPPING] Tone mapping is currently: enabled
2025-12-27T01:26:39.685Z [V4L2:ELGATO HD60 X:] (Grabber.cpp:299) setFpsSoftwareDecimation to: 1
2025-12-27T01:26:39.685Z [SIGNAL_OLD] (DetectionManual.cpp:84) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2025-12-27T01:26:39.685Z [SIGNAL_OLD] (DetectionManual.cpp:74) Signal threshold set to: {0, 0, 0} and frames: 50
2025-12-27T01:26:39.685Z [SIGNAL_AUTO] (DetectionAutomatic.cpp:375) Automatic signal detection -> errorTolerance: 9, modelTolerance: 90, sleepTime: 1000, wakeTime: 0
2025-12-27T01:26:39.685Z [COMPONENTCTRL0] HDR (global): enabled
2025-12-27T01:26:39.685Z [V4L2:ELGATO HD60 X:] (Grabber.cpp:317) Force encoding to: p010 (old: p010)
2025-12-27T01:26:39.685Z [V4L2:ELGATO HD60 X:] setQFrameDecimation is now: enabled
2025-12-27T01:26:47.923Z [PERFORMANCE] [USB: FPS = 58.99, decoding = 5ms, frames = 3539, invalid = 0, mode = direct], [INSTANCE0: FPS = 58.71, processed = 3523], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T01:27:13.796Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}]
2025-12-27T01:27:20.149Z [AUTOTONEMAPPING] Enabled: yes, time to enable: 30s, time to disable: 500ms, thresholds: { 180, 175, 160}
2025-12-27T01:27:20.678Z [AUTOTONEMAPPING] Tone mapping OFF triggered by:  U threshold (180),  after 509 ms
2025-12-27T01:27:20.678Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:143) setHdrToneMappingMode to: Disabled
2025-12-27T01:27:20.678Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:149) setHdrToneMappingMode replacing LUT and restarting
2025-12-27T01:27:20.678Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T01:27:20.678Z [FLATBUFSERVER] Tone mapping: 0
2025-12-27T01:27:20.679Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T01:27:20.679Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:89) Index 2 for YUV
2025-12-27T01:27:20.733Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T01:27:20.734Z [AUTOTONEMAPPING] Tone mapping is currently: disabled
2025-12-27T01:27:20.734Z [COMPONENTCTRL0] HDR (global): disabled
2025-12-27T01:27:37.030Z [AUTOTONEMAPPING] Enabled: yes, time to enable: 5s, time to disable: 500ms, thresholds: { 215, 175, 200}
2025-12-27T01:27:46.538Z [WEBSOCKET] (HyperAPI.cpp:946) log streaming activated for client ::ffff:192.168.1.151
2025-12-27T01:27:47.923Z [PERFORMANCE] [USB: FPS = 59.03, decoding = 5ms, frames = 3542, invalid = 0, mode = direct], [INSTANCE0: FPS = 58.84, processed = 3530], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T01:28:18.578Z [WEBSOCKET] (HyperAPI.cpp:955) log streaming deactivated for client  ::ffff:192.168.1.151
2025-12-27T01:28:18.722Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}]
2025-12-27T01:28:30.650Z [AUTOTONEMAPPING] Enabled: yes, time to enable: 5s, time to disable: 500ms, thresholds: { 215, 185, 200}
2025-12-27T01:28:34.918Z [AUTOTONEMAPPING] Tone mapping ON triggered after 5 sec
2025-12-27T01:28:34.918Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:143) setHdrToneMappingMode to: Fullscreen
2025-12-27T01:28:34.918Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:149) setHdrToneMappingMode replacing LUT and restarting
2025-12-27T01:28:34.919Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T01:28:34.919Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T01:28:34.919Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:84) Index 1 for HDR YUV
2025-12-27T01:28:34.919Z [FLATBUFSERVER] Tone mapping: 0
2025-12-27T01:28:34.971Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T01:28:34.971Z [AUTOTONEMAPPING] Tone mapping is currently: enabled
2025-12-27T01:28:34.971Z [COMPONENTCTRL0] HDR (global): enabled
2025-12-27T01:28:47.932Z [PERFORMANCE] [USB: FPS = 59.04, decoding = 5ms, frames = 3543, invalid = 0, mode = direct], [INSTANCE0: FPS = 58.96, processed = 3538], [LED0: FPS = 50.00, send = 3001, processed = 3001, dropped = 0]
2025-12-27T01:28:58.042Z [AUTOTONEMAPPING] Tone mapping OFF triggered by:  U threshold (186),  after 509 ms
2025-12-27T01:28:58.042Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:143) setHdrToneMappingMode to: Disabled
2025-12-27T01:28:58.042Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:149) setHdrToneMappingMode replacing LUT and restarting
2025-12-27T01:28:58.042Z [FLATBUFSERVER] Tone mapping: 0
2025-12-27T01:28:58.042Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T01:28:58.042Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T01:28:58.042Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:89) Index 2 for YUV
2025-12-27T01:28:58.098Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T01:28:58.099Z [AUTOTONEMAPPING] Tone mapping is currently: disabled
2025-12-27T01:28:58.099Z [COMPONENTCTRL0] HDR (global): disabled
2025-12-27T01:29:10.374Z [WEBSOCKET] (HyperAPI.cpp:946) log streaming activated for client ::ffff:192.168.1.151
2025-12-27T01:29:22.603Z [WEBSOCKET] (HyperAPI.cpp:955) log streaming deactivated for client  ::ffff:192.168.1.151
2025-12-27T01:29:22.743Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}]
2025-12-27T01:29:31.467Z [AUTOTONEMAPPING] Enabled: yes, time to enable: 5s, time to disable: 500ms, thresholds: { 215, 190, 200}
2025-12-27T01:29:35.914Z [AUTOTONEMAPPING] Tone mapping ON triggered after 5 sec
2025-12-27T01:29:35.914Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:143) setHdrToneMappingMode to: Fullscreen
2025-12-27T01:29:35.914Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:149) setHdrToneMappingMode replacing LUT and restarting
2025-12-27T01:29:35.915Z [FLATBUFSERVER] Tone mapping: 0
2025-12-27T01:29:35.915Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T01:29:35.915Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T01:29:35.915Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:84) Index 1 for HDR YUV
2025-12-27T01:29:35.966Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T01:29:35.967Z [COMPONENTCTRL0] HDR (global): enabled
2025-12-27T01:29:35.967Z [AUTOTONEMAPPING] Tone mapping is currently: enabled
2025-12-27T01:29:47.932Z [PERFORMANCE] [USB: FPS = 59.19, decoding = 7ms, frames = 3551, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.07, processed = 3545], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T01:29:57.324Z [WEBSOCKET] (HyperAPI.cpp:946) log streaming activated for client ::ffff:192.168.1.151
2025-12-27T01:30:47.921Z [V4L2:ELGATO HD60 X:] Video cache: size: 3, hits: 3560, needed: 0, cleanup: 0, limit: 8
2025-12-27T01:30:47.932Z [PERFORMANCE] [USB: FPS = 59.33, decoding = 6ms, frames = 3560, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.33, processed = 3559], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T01:31:22.587Z [IMAGETOLED_MNG0] Total index number is: 92928 (memory: 92928). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T01:31:22.868Z [IMAGETOLED_MNG0] Total index number is: 124572 (memory: 124572). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T01:31:28.663Z [MUXER0] Removed source priority 240
2025-12-27T01:31:28.663Z [MUXER0] Set visible priority to 255
2025-12-27T01:31:28.663Z [HYPERHDR0] New priority[255], previous [240]
2025-12-27T01:31:28.663Z [HYPERHDR0] No source left -> switch LED-Device off
2025-12-27T01:31:28.664Z [SMOOTHING0] Clearing queued colors before: disabling
2025-12-27T01:31:28.664Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T01:31:28.664Z [PERFORMANCE] [USB: FPS = 59.33, decoding = 6ms, frames = 3560, invalid = 0, mode = direct], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T01:31:28.664Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 0
2025-12-27T01:31:28.664Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
2025-12-27T01:31:28.664Z [COMPONENTCTRL0] Video capture device: disabled
2025-12-27T01:31:28.664Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
2025-12-27T01:31:28.665Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off
2025-12-27T01:31:28.665Z [PERFORMANCE] [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T01:31:28.665Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:543) Set LED strip to black/power off
2025-12-27T01:31:28.671Z [V4L2:ELGATO HD60 X:] Stopped
2025-12-27T01:31:28.674Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
2025-12-27T01:31:28.682Z [SMOOTHING0] Clearing queued colors before: disabling
2025-12-27T01:31:28.682Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T01:31:28.688Z [LEDDEVICE0_ADALIGHT] Received goodbye: 'HyperHDR frames: 50 (FPS), receiv.: 50, good: 50, incompl.: 0, mem1: 0, mem2: 448, heap: 123232
' (97)
2025-12-27T01:31:28.696Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyACM0
2025-12-27T01:31:28.696Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
2025-12-27T01:31:28.696Z [COMPONENTCTRL0] LED device: disabled
2025-12-27T01:31:29.534Z [SMOOTHING0] Clearing queued colors before: disabling
2025-12-27T01:31:29.534Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T01:31:29.534Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
2025-12-27T01:31:33.691Z [WEBSOCKET] (WebSocketClient.cpp:189) send close: 1000 
2025-12-27T22:41:27.582Z [MUXER0] Register new input 'System/VIDEOGRABBER' with priority 240 as inactive
2025-12-27T22:41:27.582Z [COMPONENTCTRL0] Video capture device: enabled
2025-12-27T22:41:27.583Z [V4L2:ELGATO HD60 X:] Multithreading for V4L2 is enabled. Available thread's count 3
2025-12-27T22:41:27.583Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video15
2025-12-27T22:41:27.584Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video21
2025-12-27T22:41:27.585Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video14
2025-12-27T22:41:27.585Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video22
2025-12-27T22:41:27.684Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video0
2025-12-27T22:41:27.687Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:232) Searching for Elgato HD60 X: Elgato HD60 X (video0) 0 x 0 @ 0 fps, input: -1 (p010)
2025-12-27T22:41:27.687Z [V4L2:ELGATO HD60 X:] *************************************************************************************************
2025-12-27T22:41:27.687Z [V4L2:ELGATO HD60 X:] Starting V4L2 grabber. Selected: Elgato HD60 X: Elgato HD60 X (video0) [/dev/video0] 1920 x 1080 @ 60 fps p010 input -1
2025-12-27T22:41:27.687Z [V4L2:ELGATO HD60 X:] *************************************************************************************************
2025-12-27T22:41:27.688Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:867) Hardware cropping is not supported: ignoring
2025-12-27T22:41:27.688Z [V4L2:ELGATO HD60 X:] Set device input to: Camera 1
2025-12-27T22:41:27.688Z [V4L2:ELGATO HD60 X:] Set resolution to: 1920 x 1080
2025-12-27T22:41:27.689Z [V4L2:ELGATO HD60 X:] Set framerate to 60 FPS
2025-12-27T22:41:27.689Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T22:41:27.689Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T22:41:27.689Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:84) Index 1 for HDR YUV
2025-12-27T22:41:27.739Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T22:41:27.739Z [V4L2:ELGATO HD60 X:] Video pixel format is set to: P010
2025-12-27T22:41:27.765Z [V4L2:ELGATO HD60 X:] Started
2025-12-27T22:41:27.783Z [SMOOTHING0] Clearing queued colors before: enabling
2025-12-27T22:41:27.783Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T22:41:27.783Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:246) Enable the device
2025-12-27T22:41:27.783Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyACM0
2025-12-27T22:41:27.783Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyACM0, Baud rate [2000000]bps
2025-12-27T22:41:27.805Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName:          ttyACM0
2025-12-27T22:41:27.805Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation:    /dev/ttyACM0
2025-12-27T22:41:27.805Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description:       Pico
2025-12-27T22:41:27.805Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer:      Raspberry Pi
2025-12-27T22:41:27.805Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0xa
2025-12-27T22:41:27.805Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier:  0x2e8a
2025-12-27T22:41:27.805Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber:      E661410403A17238
2025-12-27T22:41:27.807Z [LEDDEVICE0_ADALIGHT] Detected Rp2040 type board. HyperHDR skips the reset. State: 1, 1
2025-12-27T22:41:27.808Z [LEDDEVICE0_ADALIGHT] ESP sent: 'HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, mem1: 0, mem2: 448, heap: 123232'
2025-12-27T22:41:27.808Z [LEDDEVICE0_ADALIGHT] ESP sent: 'RGBW => Gain: 255/255, red: 160, green: 160, blue: 160'
2025-12-27T22:41:27.808Z [LEDDEVICE0_ADALIGHT] DETECTED DEVICE USING HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico FIRMWARE (Welcome! Awa driver 9.) at 1 msec
2025-12-27T22:41:27.808Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on
2025-12-27T22:41:27.809Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On
2025-12-27T22:41:27.809Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 20ms
2025-12-27T22:41:27.809Z [COMPONENTCTRL0] LED device: enabled
2025-12-27T22:41:27.809Z [SMOOTHING0] Using alternative smoothing input (0)
2025-12-27T22:41:27.849Z [SMOOTHING0] Using alternative smoothing procedure (0)
2025-12-27T22:41:28.642Z [V4L2:ELGATO HD60 X:] Video cache: size: 2, hits: 2353, needed: 0, cleanup: 1, limit: 8
2025-12-27T22:41:28.647Z [MUXER0] Priority 240 is now active
2025-12-27T22:41:28.647Z [MUXER0] Set visible priority to 240
2025-12-27T22:41:28.647Z [HYPERHDR0] New priority[240], previous [255]
2025-12-27T22:41:28.647Z [HYPERHDR0] New source available -> switch LED-Device on
2025-12-27T22:41:28.647Z [SMOOTHING0] Clearing queued colors before: enabling
2025-12-27T22:41:28.647Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T22:41:28.647Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 1
2025-12-27T22:41:28.647Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:246) Enable the device
2025-12-27T22:41:28.649Z [SMOOTHING0] Using alternative smoothing input (0)
2025-12-27T22:41:28.669Z [SMOOTHING0] Using alternative smoothing procedure (0)
2025-12-27T22:41:28.796Z [IMAGETOLED_MNG0] Total index number is: 124572 (memory: 124572). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T22:42:47.929Z [PERFORMANCE] [USB: FPS = 59.38, decoding = 6ms, frames = 3562, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.37, processed = 3563], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:43:15.540Z [WEBSOCKET] (WebSocketClient.cpp:40) New connection from ::ffff:192.168.1.151
2025-12-27T22:43:19.551Z [WEBSOCKET] (WebSocketClient.cpp:189) send close: 1000 
2025-12-27T22:43:19.931Z [WEBSOCKET] (WebSocketClient.cpp:40) New connection from ::ffff:192.168.1.151
2025-12-27T22:43:47.930Z [PERFORMANCE] [USB: FPS = 59.32, decoding = 7ms, frames = 3559, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.34, processed = 3560], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:44:04.350Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyACM0
2025-12-27T22:44:04.350Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
2025-12-27T22:44:04.351Z [LEDDEVICE0_ADALIGHT] Device 'adalight' is disabled due to an error: 'Rs232 SerialPortError: Resource temporarily unavailable'
2025-12-27T22:44:04.351Z [COMPONENTCTRL0] LED device: disabled
2025-12-27T22:44:04.351Z [PERFORMANCE] [USB: FPS = 59.32, decoding = 7ms, frames = 3559, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.34, processed = 3560]
2025-12-27T22:44:20.339Z [NET_DISCOVERY] Removing not responding Pico/RP2040 at ttyACM0:-1 (Pico)
2025-12-27T22:44:20.365Z [NET_DISCOVERY] Found Pico/RP2040 at ttyACM0:-1 (Pico)
2025-12-27T22:44:47.922Z [PERFORMANCE] [USB: FPS = 59.61, decoding = 7ms, frames = 3577, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.61, processed = 3576]
2025-12-27T22:45:47.928Z [PERFORMANCE] [USB: FPS = 59.71, decoding = 7ms, frames = 3583, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.71, processed = 3583]
2025-12-27T22:45:48.717Z [WEBSOCKET] (WebSocketClient.cpp:189) send close: 1000 
2025-12-27T22:45:49.148Z [WEBSOCKET] (WebSocketClient.cpp:40) New connection from ::ffff:192.168.1.151
2025-12-27T22:46:01.996Z [MUXER0] Removed source priority 240
2025-12-27T22:46:01.996Z [MUXER0] Set visible priority to 255
2025-12-27T22:46:01.996Z [HYPERHDR0] New priority[255], previous [240]
2025-12-27T22:46:01.996Z [HYPERHDR0] No source left -> switch LED-Device off
2025-12-27T22:46:01.996Z [SMOOTHING0] Clearing queued colors before: disabling
2025-12-27T22:46:01.997Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T22:46:01.997Z [PERFORMANCE] [USB: FPS = 59.71, decoding = 7ms, frames = 3583, invalid = 0, mode = direct]
2025-12-27T22:46:01.997Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 0
2025-12-27T22:46:01.997Z [COMPONENTCTRL0] Video capture device: disabled
2025-12-27T22:46:01.997Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:296) Disable the device
2025-12-27T22:46:02.008Z [V4L2:ELGATO HD60 X:] Stopped
2025-12-27T22:46:02.008Z [V4L2:ELGATO HD60 X:] Frame index = 53883, inactive or critical VIDIOC_QBUF error in v4l2 driver. Buf index = 2, worker = 0, is_active = 0.
2025-12-27T22:46:03.797Z [MUXER0] Register new input 'System/VIDEOGRABBER' with priority 240 as inactive
2025-12-27T22:46:03.797Z [COMPONENTCTRL0] Video capture device: enabled
2025-12-27T22:46:03.798Z [V4L2:ELGATO HD60 X:] Multithreading for V4L2 is enabled. Available thread's count 3
2025-12-27T22:46:03.798Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video15
2025-12-27T22:46:03.798Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video21
2025-12-27T22:46:03.799Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:240) setBrightness: 92
2025-12-27T22:46:03.799Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video14
2025-12-27T22:46:03.799Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video22
2025-12-27T22:46:03.799Z [V4L2:ELGATO HD60 X:] Found capture device: /dev/video0
2025-12-27T22:46:03.802Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:232) Searching for Elgato HD60 X: Elgato HD60 X (video0) 0 x 0 @ 0 fps, input: -1 (p010)
2025-12-27T22:46:03.802Z [V4L2:ELGATO HD60 X:] *************************************************************************************************
2025-12-27T22:46:03.802Z [V4L2:ELGATO HD60 X:] Starting V4L2 grabber. Selected: Elgato HD60 X: Elgato HD60 X (video0) [/dev/video0] 1920 x 1080 @ 60 fps p010 input -1
2025-12-27T22:46:03.802Z [V4L2:ELGATO HD60 X:] *************************************************************************************************
2025-12-27T22:46:03.802Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:867) Hardware cropping is not supported: ignoring
2025-12-27T22:46:03.802Z [V4L2:ELGATO HD60 X:] Set device input to: Camera 1
2025-12-27T22:46:03.803Z [V4L2:ELGATO HD60 X:] Set resolution to: 1920 x 1080
2025-12-27T22:46:03.803Z [V4L2:ELGATO HD60 X:] Set framerate to 60 FPS
2025-12-27T22:46:03.803Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T22:46:03.803Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T22:46:03.804Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:84) Index 1 for HDR YUV
2025-12-27T22:46:03.839Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T22:46:03.840Z [V4L2:ELGATO HD60 X:] Video pixel format is set to: P010
2025-12-27T22:46:03.858Z [V4L2:ELGATO HD60 X:] Started
2025-12-27T22:46:03.860Z [V4L2:ELGATO HD60 X:] Frame too small: 0 != 6220800
2025-12-27T22:46:03.860Z [V4L2:ELGATO HD60 X:] Frame too small: 0 != 6220800
2025-12-27T22:46:03.860Z [V4L2:ELGATO HD60 X:] Frame too small: 0 != 6220800
2025-12-27T22:46:03.860Z [V4L2:ELGATO HD60 X:] Frame too small: 0 != 6220800
2025-12-27T22:46:04.744Z [MUXER0] Priority 240 is now active
2025-12-27T22:46:04.744Z [MUXER0] Set visible priority to 240
2025-12-27T22:46:04.744Z [HYPERHDR0] New priority[240], previous [255]
2025-12-27T22:46:04.744Z [HYPERHDR0] New source available -> switch LED-Device on
2025-12-27T22:46:04.744Z [SMOOTHING0] Clearing queued colors before: enabling
2025-12-27T22:46:04.744Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T22:46:04.744Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 1
2025-12-27T22:46:04.744Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:246) Enable the device
2025-12-27T22:46:04.744Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyACM0
2025-12-27T22:46:04.744Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyACM0, Baud rate [2000000]bps
2025-12-27T22:46:04.766Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName:          ttyACM0
2025-12-27T22:46:04.766Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation:    /dev/ttyACM0
2025-12-27T22:46:04.766Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description:       Pico
2025-12-27T22:46:04.766Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer:      Raspberry Pi
2025-12-27T22:46:04.766Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0xa
2025-12-27T22:46:04.766Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier:  0x2e8a
2025-12-27T22:46:04.766Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber:      E661410403A17238
2025-12-27T22:46:04.768Z [LEDDEVICE0_ADALIGHT] Detected Rp2040 type board. HyperHDR skips the reset. State: 1, 1
2025-12-27T22:46:04.769Z [LEDDEVICE0_ADALIGHT] ESP sent: 'HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, mem1: 0, mem2: 460, heap: 123232'
2025-12-27T22:46:04.770Z [LEDDEVICE0_ADALIGHT] ESP sent: 'RGBW => Gain: 255/255, red: 160, green: 160, blue: 160'
2025-12-27T22:46:04.770Z [LEDDEVICE0_ADALIGHT] DETECTED DEVICE USING HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico FIRMWARE (Welcome! Awa driver 9.) at 2 msec
2025-12-27T22:46:04.770Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on
2025-12-27T22:46:04.770Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On
2025-12-27T22:46:04.770Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 20ms
2025-12-27T22:46:04.770Z [COMPONENTCTRL0] LED device: enabled
2025-12-27T22:46:04.770Z [SMOOTHING0] Using alternative smoothing input (0)
2025-12-27T22:46:04.810Z [SMOOTHING0] Using alternative smoothing procedure (0)
2025-12-27T22:46:15.712Z [EFFECTENGINE0] Run effect "Red mood blobs" on channel 1
2025-12-27T22:46:15.712Z [EFFECTENGINE0] (EffectEngine.cpp:92) Start the effect: name [Red mood blobs]
2025-12-27T22:46:15.712Z [MUXER0] Register new input 'Web Configuration@::ffff:192.168.1.151/EFFECT' with priority 1 as inactive
2025-12-27T22:46:15.713Z [EFFECT0(Red mo...)] Begin playing the effect with priority: 1
2025-12-27T22:46:15.713Z [MUXER0] Priority 1 is now active
2025-12-27T22:46:15.713Z [MUXER0] Set visible priority to 1
2025-12-27T22:46:15.713Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2025-12-27T22:46:15.713Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T22:46:15.713Z [SMOOTHING0] Selecting config (1) => type: Linear, pause: false, settlingTime: 200ms, interval: 40ms (25Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2025-12-27T22:46:15.713Z [SMOOTHING0] Using linear smoothing input (1)
2025-12-27T22:46:15.713Z [HYPERHDR0] New priority[1], previous [240]
2025-12-27T22:46:15.713Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 0
2025-12-27T22:46:15.713Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
2025-12-27T22:46:15.713Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 25.00 Hz
2025-12-27T22:46:15.713Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:422) Refresh rate = 25.00 Hz
2025-12-27T22:46:15.713Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 40ms
2025-12-27T22:46:15.713Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:432) Refresh interval updated to 40ms
2025-12-27T22:46:15.713Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:447) LED refresh interval adjustment caused by smoothing configuration change to 40ms (proposed: 40ms)
2025-12-27T22:46:15.793Z [SMOOTHING0] Using linear smoothing procedure (1)
2025-12-27T22:46:23.219Z [MUXER0] Removed source priority 1
2025-12-27T22:46:23.220Z [MUXER0] Set visible priority to 240
2025-12-27T22:46:23.220Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2025-12-27T22:46:23.220Z [SMOOTHING0] Smoothing queue is cleared
2025-12-27T22:46:23.220Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:380) Stopping refresh timer
2025-12-27T22:46:23.220Z [SMOOTHING0] Selecting config (0) => type: Alternative, pause: false, settlingTime: 30ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250
2025-12-27T22:46:23.220Z [SMOOTHING0] Using alternative smoothing input (0)
2025-12-27T22:46:23.220Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 50.00 Hz
2025-12-27T22:46:23.220Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:422) Refresh rate = 50.00 Hz
2025-12-27T22:46:23.220Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:366) Starting timer with interval = 20ms
2025-12-27T22:46:23.220Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:432) Refresh interval updated to 20ms
2025-12-27T22:46:23.220Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:447) LED refresh interval adjustment caused by smoothing configuration change to 20ms (proposed: 20ms)
2025-12-27T22:46:23.220Z [HYPERHDR0] New priority[240], previous [1]
2025-12-27T22:46:23.220Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:224) setBackLightEnabled: 1
2025-12-27T22:46:23.260Z [SMOOTHING0] Using alternative smoothing procedure (0)
2025-12-27T22:46:23.313Z [EFFECT0(Red mo...)] The effect quits with priority: 1
2025-12-27T22:46:23.314Z [EFFECTENGINE0] Effect 'Red mood blobs' has finished.
2025-12-27T22:46:23.314Z [EFFECT0(Red mo...)] Effect named: 'Red mood blobs' is deleted
2025-12-27T22:46:28.693Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":410}]
2025-12-27T22:46:28.719Z [WEBSOCKET] (HyperAPI.cpp:1121) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":"Pico (/dev/ttyACM0)","value":"ttyACM0"}],"ledDeviceType":"adalight"}]
2025-12-27T22:46:54.955Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}]
2025-12-27T22:46:56.298Z [WEBSOCKET] (HyperAPI.cpp:946) log streaming activated for client ::ffff:192.168.1.151
2025-12-27T22:47:40.314Z [WEBSOCKET] (HyperAPI.cpp:955) log streaming deactivated for client  ::ffff:192.168.1.151
2025-12-27T22:47:40.596Z [WEBSOCKET] (HyperAPI.cpp:1097) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":342}]
2025-12-27T22:47:40.622Z [WEBSOCKET] (HyperAPI.cpp:1121) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":"Pico (/dev/ttyACM0)","value":"ttyACM0"}],"ledDeviceType":"adalight"}]
2025-12-27T22:47:47.926Z [PERFORMANCE] [USB: FPS = 59.53, decoding = 7ms, frames = 3572, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.53, processed = 3572], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:48:47.922Z [PERFORMANCE] [USB: FPS = 59.50, decoding = 7ms, frames = 3570, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.50, processed = 3570], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:49:47.924Z [PERFORMANCE] [USB: FPS = 59.51, decoding = 7ms, frames = 3571, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.51, processed = 3570], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:50:47.926Z [PERFORMANCE] [USB: FPS = 59.52, decoding = 7ms, frames = 3571, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.52, processed = 3572], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:51:47.927Z [PERFORMANCE] [USB: FPS = 59.50, decoding = 7ms, frames = 3570, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.50, processed = 3570], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:52:35.880Z [WEBSOCKET] (HyperAPI.cpp:946) log streaming activated for client ::ffff:192.168.1.151
2025-12-27T22:52:47.921Z [PERFORMANCE] [USB: FPS = 59.50, decoding = 7ms, frames = 3570, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.50, processed = 3569], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:53:47.922Z [PERFORMANCE] [USB: FPS = 59.43, decoding = 7ms, frames = 3566, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.43, processed = 3566], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:54:47.922Z [PERFORMANCE] [USB: FPS = 59.53, decoding = 7ms, frames = 3572, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.53, processed = 3572], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:55:47.929Z [PERFORMANCE] [USB: FPS = 59.50, decoding = 7ms, frames = 3570, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.50, processed = 3571], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:55:52.961Z [IMAGETOLED_MNG0] Total index number is: 46464 (memory: 46464). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T22:55:53.234Z [IMAGETOLED_MNG0] Total index number is: 124572 (memory: 124572). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T22:55:54.057Z [IMAGETOLED_MNG0] Total index number is: 118260 (memory: 118260). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T22:55:54.928Z [IMAGETOLED_MNG0] Total index number is: 124572 (memory: 124572). User sparse processing is: disabled, image size: 960 x 540, area number: 332
2025-12-27T22:55:55.214Z [AUTOTONEMAPPING] Tone mapping OFF triggered by:  Y threshold (228),  after 507 ms
2025-12-27T22:55:55.214Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:143) setHdrToneMappingMode to: Disabled
2025-12-27T22:55:55.214Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:149) setHdrToneMappingMode replacing LUT and restarting
2025-12-27T22:55:55.214Z [FLATBUFSERVER] Tone mapping: 0
2025-12-27T22:55:55.214Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T22:55:55.214Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T22:55:55.214Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:89) Index 2 for YUV
2025-12-27T22:55:55.267Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T22:55:55.267Z [AUTOTONEMAPPING] Tone mapping is currently: disabled
2025-12-27T22:55:55.267Z [COMPONENTCTRL0] HDR (global): disabled
2025-12-27T22:56:03.923Z [AUTOTONEMAPPING] Tone mapping ON triggered after 5 sec
2025-12-27T22:56:03.924Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:143) setHdrToneMappingMode to: Fullscreen
2025-12-27T22:56:03.924Z [FLATBUFSERVER] Tone mapping: 0
2025-12-27T22:56:03.924Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:149) setHdrToneMappingMode replacing LUT and restarting
2025-12-27T22:56:03.924Z [V4L2:ELGATO HD60 X:] (V4L2Grabber.cpp:123) LUT folder location: '/usr/share/hyperhdr/lut'
2025-12-27T22:56:03.924Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:73) LUT file found: /home/jingato/.hyperhdr/lut_lin_tables.3d (uncompressed)
2025-12-27T22:56:03.924Z [V4L2:ELGATO HD60 X:] (LutLoader.cpp:84) Index 1 for HDR YUV
2025-12-27T22:56:03.975Z [V4L2:ELGATO HD60 X:] Found and loaded LUT: '/home/jingato/.hyperhdr/lut_lin_tables.3d'
2025-12-27T22:56:03.975Z [AUTOTONEMAPPING] Tone mapping is currently: enabled
2025-12-27T22:56:03.975Z [COMPONENTCTRL0] HDR (global): enabled
2025-12-27T22:56:08.648Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:240) setBrightness: 99
2025-12-27T22:56:10.312Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:240) setBrightness: 89
2025-12-27T22:56:11.401Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:240) setBrightness: 80
2025-12-27T22:56:47.918Z [V4L2:ELGATO HD60 X:] Video cache: size: 3, hits: 3565, needed: 1, cleanup: 0, limit: 8
2025-12-27T22:56:47.927Z [PERFORMANCE] [USB: FPS = 59.43, decoding = 6ms, frames = 3566, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.47, processed = 3568], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2025-12-27T22:57:47.929Z [PERFORMANCE] [USB: FPS = 59.56, decoding = 6ms, frames = 3574, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.57, processed = 3574], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]

[awawa-dev]

Too much has happened in this log (user interaction with browser), signal detection is probably enable which makes the situation more unclear. So I dont have any hint for you except to try maybe v22beta0.